Buyer summary: The two scraper heads list widths of 380 mm and 355 mm with 31.5 mm handle sockets. The half-round pusher lists a 32 mm socket, while the straight pusher lists 30 mm. The separate 150 cm handle has no shaft diameter in its compared fields: its length alone does not establish a match.
This guide compares five existing manual scraper, slurry-pusher and handle records. It focuses on width options, socket dimensions, replaceable blades and supplied parts. It is separate from the existing dairy-cleaning guide for brushes, jetters and other equipment. No automatic scraper system, cleaning performance or cross-product handle compatibility is inferred.
Choose a head width and retain its height
CLN-00012 lists a 380 mm width and 94 mm height; CLN-00013 lists 355 mm and 95 mm. Both are recorded as scraper heads with a 31.5 mm handle socket. Quote width and SKU together, and confirm the complete supplied configuration rather than assuming that a handle comes with a head.
Separate half-round and straight pusher options
The half-round CLN-00018 lists 50, 58 and 60 cm widths with a 32 mm socket. The straight CLN-00019 lists 30, 35, 40 and 55 cm widths with a 30 mm socket. Keep each width attached to its own product. A shared use of the word scraper does not make the interfaces interchangeable.
Check handle geometry before specifying a set
The three socket records are 30 mm, 31.5 mm and 32 mm. CLN-00014 lists 150 cm length and aluminium or stainless-steel material options, but no shaft diameter or end geometry in the compared fields. Request a labelled handle-end and socket drawing, tolerances and written pairing confirmation for an assembled set. Do not assume that the separately listed handle fits every head.
Identify replaceable parts by the exact pusher
Both pusher records list a replaceable rubber scraper with bolted blade fixing. Only the half-round record lists wing-nut adjustment for the handle holder. The compared fields do not establish replacement blade dimensions, hole spacing or a spare-part reference. Specify the exact pusher SKU and selected width when requesting replacement rubber and fixing details.
Keep supply and material statements specific
CLN-00014 explicitly states handle only, scraper not included. The aluminium and stainless-steel options belong to that handle record. They are not evidence of the head or pusher frame material. Request the bill of materials, assembled versus component supply and packing details for the exact quotation. Rubber wording alone does not establish chemical resistance or suitability for every floor.
Compare the listed specifications
Values below belong to the linked product code. A field marked not listed requires confirmation for that SKU; it is not filled from another model.
Two scraper heads: width, height and socket
| Specification | 380 mm Manure Scraper Head ERV-VI-CLN-00012 |
355 mm Manure Scraper Head ERV-VI-CLN-00013 |
|---|---|---|
| Width | 380 mm | 355 mm |
| Height | 94 mm | 95 mm |
| Handle socket diameter | 31.5 mm | 31.5 mm |
| Configuration | Scraper head | Scraper head |
Two pusher formats: width options and blade fixing
| Specification | Half-Round Muck and Slurry Pusher ERV-VI-CLN-00018 |
Straight Muck and Slurry Pusher ERV-VI-CLN-00019 |
|---|---|---|
| Width options | 50 cm; 58 cm; 60 cm | 30 cm; 35 cm; 40 cm; 55 cm |
| Handle socket diameter | 32 mm | 30 mm |
| Scraper | Replaceable rubber scraper | Replaceable rubber scraper |
| Blade fixing | Bolted | Bolted |
| Handle holder | Wing-nut adjustment | Not listed; confirm for this SKU |
Separate handle: recorded length and supply
| Specification | 150 cm Scraper Handle ERV-VI-CLN-00014 |
|---|---|
| Length | 150 cm |
| Material options | Aluminum; stainless steel |
| Supply | Handle only; scraper not included |
Quotation checklist
- State exact SKU, head format, listed width and quantity.
- Keep socket diameter with its own head or pusher reference.
- Request handle shaft diameter, end geometry, socket depth and tolerances; obtain written pairing confirmation.
- Confirm assembled versus head-only/handle-only supply and included fasteners.
- For replacement rubber request dimensions, bolt-hole spacing and the matching spare reference for the exact width.
- Request frame/blade material and product-specific evidence for any required chemical or floor suitability.
- Confirm packing, destination, availability and commercial terms.
Frequently asked purchasing questions
Do the 380 mm and 355 mm heads have the same socket size?
Both records list 31.5 mm. Their recorded heights differ: 94 mm for CLN-00012 and 95 mm for CLN-00013.
Do the straight and half-round pushers have the same socket?
No. The straight record lists 30 mm; the half-round record lists 32 mm. This is not a universal handle interface.
Is the 150 cm handle confirmed compatible with those heads?
No shaft diameter or end geometry is established in its compared fields. Request the drawing and written pairing confirmation for the selected head.
Does the handle product include a scraper?
No. CLN-00014 explicitly lists handle only, scraper not included. Confirm each component in the quotation.
Can one replacement rubber blade be assumed to fit both pushers?
No. Replaceable rubber and bolted fixing are listed, but blade dimensions and hole spacing are not. Request a matching spare reference for the exact SKU and width.
Browse the existing range
Cleaning Equipment — open individual products for their full specifications and quotation options.
Compare dairy brushes, jetters and other cleaning equipment separately.
Request a product-specific quotation
List each selected SKU, required configuration and quantity separately, with your destination country. Include the existing equipment reference, labelled measurements and the supplied parts you want confirmed.
This is a general enquiry; no product is selected automatically. Enter the product references and specifications in the form.