Buyer summary: The 25 L stainless steel bucket lists a 175 mm mouth; the 25 L and 32 L PC buckets list 190 mm mouths. The plastic lid has a 175 mm bucket-mouth reference and two 19 mm ports. The 32 L PC bucket does not include a lid. These values support separate bucket, lid and seal checks; they do not certify a matched assembly.
Compare milking collection buckets, separate lids and seals, and quarter-milker collection containers. Choose the exact container, then confirm the lid, sealing profile, connections and supplied parts. For buckets used to feed calves, use the separate feeding-equipment guide linked below.
Compare the mouth as well as the volume
Both TUB-00010 and TUB-00011 list 25 L, but their mouth diameters are 175 mm and 190 mm respectively. Their base diameters and heights also differ. The 32 L PC bucket shares a listed 190 mm mouth with the 25 L PC version but has a larger 380 mm base and a listed 485 mm height. A common mouth dimension still requires a lid and seal-profile check; equal volume is not a fit statement.
Keep material options attached to the correct SKU
TUB-00010 lists 304 or 201 stainless steel as material options. State which option you want quoted rather than assuming every bucket is 304. TUB-00011 and TUB-00012 list polycarbonate. These material labels do not establish food-contact certification, cleaning chemistry, temperature limits or pressure/vacuum ratings. Request product-specific documents and instructions if your purchase depends on those requirements.
Check the plastic lid reference before pairing it with a bucket
TUB-00013 lists a PC lid, a 175 mm bucket-mouth reference, two ports, a 19 mm listed port diameter and a rubber sealing ring. The fact that it is plastic does not establish fit to the 190 mm PC buckets. Even where a bucket lists 175 mm, confirm the rim, seal and connection arrangement rather than presenting one shared dimension as a validated pairing.
Order lids, rings and ports as separate requirements
TUB-00012 explicitly lists the lid as not included. Specify any lid, seal or fittings separately. TUB-00015 and TUB-00016 are stainless steel lids with two and three ports respectively; their table entries do not establish a port diameter or compatible bucket model. TUB-00014 identifies a bucket lid sealing ring without full dimensional or material specifications. Send the current parts or measured drawings for a fit review.
Distinguish a collection container from a complete assembly
VAC-00001 lists 8 L capacity, a PP lid and a PE container body. MIL-00003 lists plastic containers in 8 L and 12 L options. Neither capacity entry establishes that every hose, fitting or complete quarter-milking assembly is included. These are equipment procurement descriptions, not treatment instructions or a claim of clinical performance. Confirm the lid, port and supplied-part details for the chosen configuration.
Compare the listed specifications
Values below belong to the linked product code. A field marked not listed requires confirmation for that SKU; it is not filled from another model.
Milking bucket dimensions and material options
| Specification | 25 L Stainless Steel Milking Bucket ERV-DF-TUB-00010 |
25 L Polycarbonate Milking Bucket ERV-DF-TUB-00011 |
32 L Polycarbonate Milking Bucket ERV-DF-TUB-00012 |
|---|---|---|---|
| Capacity | 25 L | 25 L | 32 L |
| Material options | 304 or 201 stainless steel | Not listed; confirm for this SKU | Not listed; confirm for this SKU |
| Base diameter | 305 mm | 325 mm | 380 mm |
| Mouth diameter | 175 mm | 190 mm | 190 mm |
| Wall thickness | 1.0 mm | 7.0 mm | 7.0 mm |
| Height | 465 mm | 470 mm | 485 mm |
| Weight | 3.40 kg | 3.40 kg | 4.1 kg |
| Material | Not listed; confirm for this SKU | Polycarbonate (PC) | Polycarbonate (PC) |
| Appearance | Not listed; confirm for this SKU | Transparent body | Transparent body |
| Volume indication | Not listed; confirm for this SKU | Graduated scale | Not listed; confirm for this SKU |
| Lid supply | Not listed; confirm for this SKU | Not listed; confirm for this SKU | Not included; specify separately |
Separate lids and sealing ring
| Specification | Plastic Milking Bucket Lid ERV-DF-TUB-00013 |
Milking Bucket Lid Sealing Ring ERV-DF-TUB-00014 |
Two-Port Stainless Steel Milking Bucket Lid ERV-DF-TUB-00015 |
Three-Port Stainless Steel Milking Bucket Lid ERV-DF-TUB-00016 |
|---|---|---|---|---|
| Material | Plastic | Not listed; confirm for this SKU | Stainless steel | Stainless steel |
| Component type | Milking bucket lid | Bucket lid sealing ring | Not listed; confirm for this SKU | Not listed; confirm for this SKU |
| Plastic type | Polycarbonate (PC) | Not listed; confirm for this SKU | Not listed; confirm for this SKU | Not listed; confirm for this SKU |
| Bucket mouth reference | 175 mm | Not listed; confirm for this SKU | Not listed; confirm for this SKU | Not listed; confirm for this SKU |
| Lid ports | 2 | Not listed; confirm for this SKU | Not listed; confirm for this SKU | Not listed; confirm for this SKU |
| Listed port diameter | 19 mm | Not listed; confirm for this SKU | Not listed; confirm for this SKU | Not listed; confirm for this SKU |
| Sealing ring material | Rubber | Not listed; confirm for this SKU | Not listed; confirm for this SKU | Not listed; confirm for this SKU |
| Ports | Not listed; confirm for this SKU | Not listed; confirm for this SKU | 2 | 3 |
Quarter-milker collection containers
| Specification | 8 L Quarter Milker Collection Container ERV-DF-VAC-00001 |
Plastic Quarter Milker Container ERV-VI-MIL-00003 |
|---|---|---|
| Capacity | 8 L | Not listed; confirm for this SKU |
| Lid material | Polypropylene (PP) | Not listed; confirm for this SKU |
| Container material | Polyethylene (PE) | Not listed; confirm for this SKU |
| Capacity options | Not listed; confirm for this SKU | 8 L; 12 L |
| Material | Not listed; confirm for this SKU | Plastic |
Quotation checklist
- Exact bucket or container SKU and capacity option
- Material option, mouth and base diameter, height and installation-space requirements
- Lid reference, rim/seal profile, port count and connection dimensions
- Whether the quotation includes the lid, ring, tubing and fittings; keep each component explicit
- Required product documentation and model-specific cleaning instructions
- Quantity per item and destination country
Frequently asked purchasing questions
Will a lid fit both 25 L buckets?
The listed mouths differ: 175 mm for the stainless steel TUB-00010 and 190 mm for the PC TUB-00011. Confirm the exact lid, sealing profile and bucket rather than assuming fit from capacity.
Does the 32 L PC bucket include a lid?
No. TUB-00012 lists the lid as not included; specify it separately and confirm the 190 mm mouth and sealing arrangement.
Is the plastic lid automatically suitable for the PC buckets?
No such match is established. TUB-00013 has a 175 mm mouth reference, while the two PC bucket records list 190 mm mouths. Material alone does not establish fit.
Do the stainless steel lids have a 19 mm port diameter?
The 19 mm entry belongs to TUB-00013. The TUB-00015 and TUB-00016 tables list port counts, not a diameter. Confirm their connections separately.
Is this the calf milk feeding-bucket guide?
No. This guide concerns milking collection equipment and separate components. Use the existing calf bucket and multi-teat feeder comparison when sourcing feeding equipment.
Browse the existing range
Milking Buckets & Milk Containers — open individual products for their full specifications and quotation options.
For feeding equipment: Calf milk buckets and multi-teat feeders compared.
Request a product-specific quotation
List each selected SKU, required configuration and quantity separately, with your destination country. Include the existing equipment reference, labelled measurements and the supplied parts you want confirmed.
This is a general enquiry; no product is selected automatically. Enter the product references and specifications in the form.