Buyer summary: Ten replacement teat records list natural rubber and different size or dimension strings. Four explicitly record cross openings; three record openings on both sides of the tip. FED-00009 alone lists a vent hole in these compared fields. An opening description or overall dimension does not establish flow rate, age suitability or a matched bottle/bucket connection.
This guide compares replacement calf feeding teats as separate components. Existing bottle and milk-feeder guides compare complete vessels and feeding positions; this page focuses on the teat-specific records and the fit information needed for a spare-part quotation. It gives no feeding ration, feeding technique, animal-age selection or cleaning procedure.
Keep dimension strings attached to the exact teat
FED-00007 lists 69 x 24 mm, FED-00015 lists 73.5 x 40 mm and FED-00019 lists 68 x 38.5 mm. Their compared fields do not define a mounting interface or the measurement endpoints. Do not reinterpret the second number as an opening, thread or retaining-ring diameter without a labelled drawing. Quote the SKU and its source size string together.
Distinguish the four cross-opening records
FED-00009 lists 107 x 62 mm, Cross opening and With vent hole. FED-00016 lists 77 x 32 mm and Cross opening at tip; FED-00017 lists 100 x 36 mm and Cross opening; FED-00018 lists 48 x 34 mm and Cross opening at tip. The wording and dimension records are not a guarantee that the parts share a base, slit geometry, retainer or flow performance.
Compare the side-opening records without assuming equal delivery
FED-00010 lists 108 x 26 mm, FED-00012 lists 102 x 20 mm and FED-00013 lists 102 x 40 mm. All three record Openings on both sides of the tip. The compared fields do not establish opening dimensions, hardness, wall thickness or measured flow under stated conditions. Do not rank feeding speed from the opening description, colour or one overall dimension.
Keep the vent statement product-specific
With vent hole is explicitly recorded for FED-00009. A missing vent field for another teat is unconfirmed, not proof of a sealed or unvented design. Likewise, the three dimension-only records do not have an opening description in the compared fields. Request the exact tip, vent and base drawing needed for the intended replacement.
Request the complete bottle or feeder interface
Overall dimensions do not establish flange diameter, groove position, retaining-cap geometry, required wall thickness or valve pairing. Provide the host bottle, bucket or feeder reference, existing part reference, labelled measurements and photographs. Request written fit confirmation and the required cap, ring, seal or valve references. No universal bottle/bucket fit is inferred.
Separate material, performance and included parts
All ten records list Natural rubber. That wording does not establish a particular formulation, hardness, material-contact certificate, cleaning temperature or service life. These are separately listed replacement teats; a retaining cap, valve or complete feeding vessel is not assumed included. Request the product-specific material/care documentation and an itemised supplied-parts list.
Compare the listed specifications
Values below belong to the linked product code. A field marked not listed requires confirmation for that SKU; it is not filled from another model.
Cross-opening records
| Specification | Tan Cylindrical-Base Calf Feeding Teat ERV-DF-FED-00009 |
Black Raised-Base Calf Feeding Teat ERV-DF-FED-00016 |
Pink Straight Calf Feeding Teat ERV-DF-FED-00017 |
Pink Short Calf Feeding Teat ERV-DF-FED-00018 |
|---|---|---|---|---|
| Material | Natural rubber | Natural rubber | Natural rubber | Natural rubber |
| Product type | Replacement calf feeding teat | Replacement calf feeding teat | Replacement calf feeding teat | Replacement calf feeding teat |
| Listed dimensions | 107 × 62 mm | Not listed; confirm for this SKU | 100 × 36 mm | Not listed; confirm for this SKU |
| Teat opening | Cross opening | Not listed; confirm for this SKU | Cross opening | Not listed; confirm for this SKU |
| Vent | With vent hole | Not listed; confirm for this SKU | Not listed; confirm for this SKU | Not listed; confirm for this SKU |
| Listed size | Not listed; confirm for this SKU | 77 x 32 mm | Not listed; confirm for this SKU | 48 x 34 mm |
| Outlet | Not listed; confirm for this SKU | Cross opening at tip | Not listed; confirm for this SKU | Cross opening at tip |
Openings on both sides of the tip
| Specification | Peach Tapered Calf Feeding Teat ERV-DF-FED-00010 |
Black Slim Calf Feeding Teat ERV-DF-FED-00012 |
Black Ribbed Calf Feeding Teat ERV-DF-FED-00013 |
|---|---|---|---|
| Material | Natural rubber | Natural rubber | Natural rubber |
| Product type | Replacement calf feeding teat | Replacement calf feeding teat | Replacement calf feeding teat |
| Listed dimensions | 108 × 26 mm | 102 × 20 mm | 102 × 40 mm |
| Teat opening | Openings on both sides of the tip | Openings on both sides of the tip | Openings on both sides of the tip |
Dimension records with unlisted opening details
| Specification | Pink Ribbed Calf Feeding Teat ERV-DF-FED-00007 |
Black Wide-Base Calf Feeding Teat ERV-DF-FED-00015 |
Black Tall Calf Feeding Teat ERV-DF-FED-00019 |
|---|---|---|---|
| Material | Natural rubber | Natural rubber | Natural rubber |
| Product type | Replacement calf feeding teat | Replacement calf feeding teat | Replacement calf feeding teat |
| Listed size | 69 x 24 mm | 73.5 x 40 mm | 68 x 38.5 mm |
Quotation checklist
- State exact replacement teat SKU, quantity and required host bottle/bucket/feeder reference.
- Copy the listed size string with the SKU and request labelled measurement endpoints and tolerances.
- Request base/flange, groove, mounting hole and retaining-cap dimensions rather than assuming overall size establishes fit.
- Confirm the exact tip opening, vent and any required valve configuration for the chosen part.
- Provide existing part photographs and request written host/retainer/valve pairing confirmation.
- If measured flow or material properties are procurement requirements, request product-specific test conditions and evidence; do not infer them from colour or opening names.
- Request material-contact and care documentation as required, plus the exact supplied-parts list.
- Confirm packing, destination, availability and commercial terms.
Frequently asked purchasing questions
Do the listed dimensions confirm a retaining-ring size?
No labelled mounting geometry is established by the dimension strings. Request the base/flange and retainer drawing for the exact part.
Which record explicitly lists a vent hole?
FED-00009 lists With vent hole. Missing vent information on another record is unconfirmed rather than proof of absence.
Do all ten records specify a cross opening?
No. Four record cross-opening wording; three record openings on both sides of the tip; three do not state an opening description in the compared fields.
Can an opening description establish milk flow rate?
No measured flow or test conditions are established by the compared fields. Request product-specific evidence if a flow requirement applies.
Does natural rubber establish a cleaning temperature or service life?
No. Request the exact material/care instructions and supporting specification; those properties are not inferred here.
Is a cap, valve or bottle confirmed included?
No such complete set is established by these replacement-teat records. Quote each needed component and confirm the supplied parts.
Browse the existing range
Feeding & AI Equipments — open individual products for their full specifications and quotation options.
Compare complete calf bottle capacities and configurations separately.
Compare milk buckets and multi-position feeders separately; teat fit still needs confirmation.
Request a product-specific quotation
List each selected SKU, required configuration and quantity separately, with your destination country. Include the existing equipment reference, labelled measurements and the supplied parts you want confirmed.
This is a general enquiry; no product is selected automatically. Enter the product references and specifications in the form.