Buyer summary: Compare the complete model reference, not wattage alone. The four listings differ in recorded frequency, speed and drive format. A 110 V or 220 V option does not establish automatic dual-voltage operation, and a shared power figure does not establish equivalent cutting performance or interchangeable combs.
This guide compares four listed sheep and horse clipper products for procurement. It separates electrical labels, speed fields, drive configuration and recorded supplied components. It does not provide clipping techniques, blade settings, animal preparation or electrical installation instructions. Product-specific intended use and instructions require separate confirmation.
Keep sheep and horse product references distinct
AUX00020 is a 690 W sheep clipper listing; AUX00015 is a 690 W horse clipper listing. Both record a 0-2400 rpm speed field, but their frequency fields differ. Animal names and equal power figures do not establish cross-species suitability or identical heads, blades or performance. Specify the exact product reference and intended requirement.
Check voltage option and frequency as separate fields
AUX00020 and AUX00021 list 50/60 Hz, while AUX00015 and AUX00016 list 50 Hz. All four list 110 V and 220 V as options. Confirm the selected unit’s actual input rating, frequency, plug and documentation for the destination. Do not treat separate voltage options as an automatic switching range or extend a 50 Hz field to 60 Hz.
Compare recorded speeds without inventing output claims
AUX00020 lists 0-2400 rpm and AUX00015 lists the same recorded speed range. AUX00021 lists 3300 rpm, while AUX00016 lists rotational speed 3200 rpm. These source labels are reproduced as written; they do not establish cutting strokes per minute, throughput, noise, continuous duty or an independently tested performance ranking.
Distinguish external power and flexible-shaft configurations
AUX00021 records a photographed yellow-handled clipper with an external power unit and cable. Confirm the exact bill of materials rather than assuming every photographed component is included. AUX00016 lists a brushless motor and flexible shaft length 1.85 m but no wattage in the compared fields. Do not copy the power rating of another model into that listing.
Confirm comb, cutter and accessory supply by SKU
AUX00020 and AUX00015 record a carrying case, comb and cutter as the catalogue supply. The compared AUX00021 and AUX00016 fields do not establish an equivalent accessory set. Request the current quoted contents, comb/cutter references, mounting geometry and required care documentation; compatibility with another model or brand is not inferred.
Compare the listed specifications
Values below belong to the linked product code. A field marked not listed requires confirmation for that SKU; it is not filled from another model.
Sheep clipper: variable-speed listing
| Specification | 690W Electric Sheep Clipper with Variable Speed ERV-VI-AUX-00020 |
|---|---|
| Power | 690 W |
| Speed | 0-2400 rpm |
| Frequency | 50/60 Hz |
| Listed voltage options | 110 V or 220 V |
| Catalogue supply | Carrying case, comb and cutter |
Sheep clipper: external-power configuration
| Specification | 200W Electric Sheep Clipper with External Power Unit ERV-VI-AUX-00021 |
|---|---|
| Power | 200 W |
| Speed | 3300 rpm |
| Frequency | 50/60 Hz |
| Listed voltage options | 110 V or 220 V |
| Photographed configuration | Yellow-handled clipper with external power unit and cable |
Horse clipper: recorded electrical and supply fields
| Specification | Electric Horse Clipper 690 W ERV-VI-AUX-00015 |
|---|---|
| Listed power | 690 W |
| Speed range | 0-2400 rpm |
| Frequency | 50 Hz |
| Voltage options | 110 V; 220 V |
| Listed supply | Carrying case, comb and cutter |
Brushless flexible-shaft sheep clipper
| Specification | Brushless Sheep Clipper with 1.85 m Flexible Shaft ERV-VI-AUX-00016 |
|---|---|
| Motor | Brushless |
| Rotational speed | 3200 rpm |
| Frequency | 50 Hz |
| Voltage options | 110 V; 220 V |
| Flexible shaft length | 1.85 m |
Quotation checklist
- State exact SKU, selected voltage version and quantity.
- Confirm actual frequency, input rating, plug and required destination documents for the selected unit.
- Keep speed labels and units as supplied; request definitions and any required performance evidence.
- Confirm drive format and exact supplied external unit, cable or shaft components.
- Request comb/cutter references and drawings for any required replacement-part match.
- Confirm quoted accessories; do not transfer the carrying-case/comb/cutter set between families.
- Request product-specific intended-use, duty and care instructions; no animal or performance match is assumed.
- Confirm packing, availability and commercial terms.
Frequently asked purchasing questions
Are all four listings confirmed 50/60 Hz?
No. AUX00020 and AUX00021 list 50/60 Hz; AUX00015 and AUX00016 list 50 Hz. Confirm the actual selected unit’s rating.
Do 110 V and 220 V options mean automatic dual voltage?
Not established. They are recorded as options. Specify the required version and request the actual rating and plug configuration.
Does the brushless model have a 690 W rating?
No wattage is listed for AUX00016 in the compared fields. Its brushless motor and 1.85 m flexible shaft do not establish a power rating borrowed from another clipper.
Are carrying case, comb and cutter listed for every model?
They are recorded for AUX00020 and AUX00015. Confirm the quoted supply for AUX00021 and AUX00016 independently.
Can equal wattage establish interchangeable combs or animal suitability?
No. Specify the exact model and request product-specific intended-use and component-interface information. Power alone does not establish a match.
Browse the existing range
Dairy Farming — open individual products for their full specifications and quotation options.
Request a product-specific quotation
List each selected SKU, required configuration and quantity separately, with your destination country. Include the existing equipment reference, labelled measurements and the supplied parts you want confirmed.
This is a general enquiry; no product is selected automatically. Enter the product references and specifications in the form.