Buyer summary: All five compared records list plastic barrels. Their metal-component descriptions differ: chrome-plated brass, aluminium alloy, or chrome-plated zinc alloy. INJ-01003 separately records a chrome-plated finish. The 10 ml INJ-01004 has stepless adjustment wording, while the other records list 1–5 ml in five steps. These labels are not accuracy-test results.
This guide compares five plastic-barrel pistol syringe records for a construction-specific quotation. It complements the existing syringe feed-type comparison, which covers different SKUs including a glass-barrel pistol model. It gives no medicine, dose, route or administration guidance, and does not infer service life or compatibility from the materials.
Distinguish brass, aluminium and zinc-alloy component records
INJ-01001 lists chrome-plated brass metal components with 30 ml and 50 ml capacity options. INJ-01002 and INJ-01003 list aluminium-alloy metal components and 50 ml capacity. INJ-01004 lists chrome-plated zinc alloy with 10 ml capacity; INJ-01006 lists chrome-plated zinc alloy with 50 ml. Keep the material attached to the exact SKU rather than ordering by a similar pistol outline.
Do not transfer the separately listed finish between aluminium models
INJ-01003 records Metal component finish as Chrome plated. The compared INJ-01002 fields do not state that finish. The two source titles are similar, but that does not make the recorded configurations identical. Quote the SKU and request a product-specific finish and component drawing if those are requirements; omission is not proof that the other model lacks a finish.
Keep the plastic barrel separate from the metal-component description
Plastic is listed for the barrel of all five products. Brass, aluminium and zinc-alloy wording concerns their metal components. It does not establish an all-metal syringe, a specific plastic resin, all wetted materials, chemical resistance or a sterilisation temperature. Request the complete material and care specification for the exact version.
Read settings independently of barrel capacity
INJ-01001, INJ-01002, INJ-01003 and INJ-01006 record 1–5 ml, five steps. INJ-01004 records Stepless without numeric adjustment bounds in the compared fields. A 50 ml capacity is not a 50 ml per-operation setting claim; stepless wording is not evidence of a zero-to-10 ml adjustment range. Request version-specific setting definitions, test conditions and any required accuracy evidence.
Confirm connections and replacement parts by model
Each compared record lists Luer-lock, but that label does not confirm complete assembly fit, a matched needle or the interchangeability of barrels, seals and adjustment parts across these SKUs. Provide equipment references and request drawings, part numbers and written pairing confirmation. Similar capacity and shared connection wording are not a spare-parts catalogue.
Request the actual supplied configuration
The compared fields do not provide a complete packing list, spare-seal quantities, needle inclusion or maintenance instructions. Specify the selected SKU/capacity and required accessories individually. No self-filling kit, reservoir, feed tube or automatic refill operation is established by these construction and setting fields.
Compare the listed specifications
Values below belong to the linked product code. A field marked not listed requires confirmation for that SKU; it is not filled from another model.
Brass and aluminium component records
| Specification | Brass-Component Pistol Veterinary Syringe, 30 or 50 ml ERV-VI-INJ-01001 |
50 ml Pistol Veterinary Syringe with Aluminum Alloy Components ERV-VI-INJ-01002 |
50 ml Pistol Veterinary Syringe with Aluminum Alloy Components ERV-VI-INJ-01003 |
|---|---|---|---|
| Available capacities | 30 ml, 50 ml | Not listed; confirm for this SKU | Not listed; confirm for this SKU |
| Metal components | Chrome-plated brass | Aluminum alloy | Aluminum alloy |
| Barrel | Plastic | Plastic | Plastic |
| Dose settings | 1–5 ml, five steps | 1–5 ml, five steps | 1–5 ml, five steps |
| Connection | Luer-lock | Luer-lock | Luer-lock |
| Capacity | Not listed; confirm for this SKU | 50 ml | 50 ml |
| Metal component finish | Not listed; confirm for this SKU | Not listed; confirm for this SKU | Chrome plated |
Zinc-alloy component records
| Specification | 10 ml Pistol Veterinary Syringe ERV-VI-INJ-01004 |
50 ml Pistol Veterinary Syringe with Zinc Alloy Components ERV-VI-INJ-01006 |
|---|---|---|
| Capacity | 10 ml | 50 ml |
| Metal components | Chrome-plated zinc alloy | Chrome-plated zinc alloy |
| Barrel | Plastic | Plastic |
| Dose adjustment | Stepless | Not listed; confirm for this SKU |
| Connection | Luer-lock | Luer-lock |
| Dose settings | Not listed; confirm for this SKU | 1–5 ml, five steps |
Quotation checklist
- State exact SKU, one listed capacity and quantity.
- Specify metal-component material, barrel material and any required finish separately.
- For INJ-01002 versus INJ-01003 request the exact configuration rather than treating the similar names as the same product.
- Request numeric adjustment bounds where missing and product-specific setting definitions and required accuracy evidence.
- Provide intended connection/equipment references and request written pairing confirmation.
- Request specific barrel, seal and adjustment-part references for spares; no cross-model fit is inferred.
- Confirm included accessories, complete wetted materials and product-specific care instructions.
- Confirm packing, destination, availability and commercial terms.
Use a quotation-to-order review sheet
Copy these review fields into your purchasing record. Keep the supplier’s answer separate from your original request. The entries below identify the review structure; they are not a completed or approved order.
| Review field | Requested | Supplier quotation | Approved purchase order |
|---|---|---|---|
| Model reference | ERV-VI-INJ-01006 | Await written confirmation | Pending approval |
| Barrel and metal-component description | Plastic barrel; chrome-plated zinc-alloy metal components, as listed | Confirm exact model description | Pending approval |
| Replacement parts | List required parts and quantities | Confirm included or separately quoted | Pending approval |
| Quantity and destination | Enter buyer requirements | Confirm quotation response | Pending approval |
| Document version | Record enquiry date/reference | Record final quotation reference | Record PO version and reviewer |
Frequently asked purchasing questions
Are these all-metal syringes?
The compared records list plastic barrels. The metal descriptions refer to metal components rather than the entire product.
Are both aluminium-model finishes explicitly recorded as chrome plated?
INJ-01003 has a separate Chrome plated finish field. INJ-01002 does not state a finish in its compared fields; request confirmation rather than transferring the other record.
Do the 50 ml models list 50 ml as a setting?
The compared setting fields for those models record 1–5 ml in five steps. Capacity and settings are separate fields.
Does stepless mean a documented 0–10 ml range?
No numeric adjustment bounds are established for INJ-01004 by that wording. Request the version-specific specification.
Can seals and plastic barrels be assumed interchangeable?
No. Shared material, capacity or Luer-lock wording does not establish replacement-part fit. Request exact model/part references.
Browse the existing range
Metal Syringe Series — open individual products for their full specifications and quotation options.
Review the separate capacity/feed-type comparison, including a glass-barrel pistol record.
Request a product-specific quotation
List each selected SKU, required configuration and quantity separately, with your destination country. Include the existing equipment reference, labelled measurements and the supplied parts you want confirmed.
This is a general enquiry; no product is selected automatically. Enter the product references and specifications in the form.