Buyer summary: INJ-01057 records A 6 x 110 mm, B 6 x 120 mm and C 6 x 190 mm. INJ-01061 records seven different A-to-G size pairs, with a brass hub and SUS304 cannula. Keep each type letter with its own product code and full size pair, then confirm the actual host connection.
A cannula or drench nozzle enquiry needs more than a short size label. This guide compares two existing component records so purchasing teams can keep type letters, dimensions and fitting descriptions attached to the correct SKU. It covers procurement only. It does not select a component for an animal, medicine or administration procedure.
Keep type letters within the 6 mm product record
ERV-VI-INJ-01057 lists type A as 6 x 110 mm, type B as 6 x 120 mm and type C as 6 x 190 mm. The record also asks buyers to specify the cannula type and syringe connection. Use the full SKU and size pair together; a type A label alone does not identify a component across the catalogue. The listed Diameter field does not define an internal bore or a connection thread.
Retain all seven INJ-01061 size references
INJ-01061 records A 1.2 x 55 mm, B 1.6 x 95 mm, C 2.0 x 95 mm, D 2.8 x 105 mm, E 3.4 x 105 mm, F 4.0 x 105 mm and G 3.0 x 235 mm. These are catalogue size pairs. Request confirmation of measurement axes, internal bore and dimensional tolerances where required; do not infer a connector size or animal-use match from the pair.
Separate material from a confirmed interface
The brass hub and SUS304 stainless steel cannula belong to INJ-01061. Those material descriptions do not establish a thread specification or a Luer-lock connection. INJ-01057 asks buyers to specify the syringe connection, but its compared specification table does not identify a material or a connector standard. Send the existing syringe or drench-head reference and request an end-fitting drawing and written fit confirmation. Do not infer fit from a similar photograph or equal size text.
Request the supplied set and care documents for the exact component
Confirm whether the quotation covers the cannula/nozzle alone or any separately identified seals, nuts, adapters and spare parts. The compared fields do not establish sterility, a cleaning or sterilisation temperature, chemical compatibility or a pressure rating. Request the exact product instructions and supporting documentation for the intended purchase; no operating or administration procedure is supplied by this comparison.
Compare the listed specifications
Values below belong to the linked product code. A field marked not listed requires confirmation for that SKU; it is not filled from another model.
6 mm type-specific size pairs
| Specification | 6 mm Veterinary Drench Cannula ERV-VI-INJ-01057 |
|---|---|
| Diameter | 6 mm |
| Length options | 110 mm, 120 mm, 190 mm |
| Configuration note | Specify the cannula type and syringe connection when ordering |
| Type A dimensions | 6 x 110 mm |
| Type B dimensions | 6 x 120 mm |
| Type C dimensions | 6 x 190 mm |
Seven nozzle size references and materials
| Specification | Stainless Steel Bird Drench Nozzles ERV-VI-INJ-01061 |
|---|---|
| Hub material | Brass |
| Cannula material | SUS304 stainless steel |
| Listed size options | 1.2 x 55 mm, 1.6 x 95 mm, 2.0 x 95 mm, 2.8 x 105 mm, 3.4 x 105 mm, 4.0 x 105 mm, 3.0 x 235 mm |
| Type A dimensions | 1.2 x 55 mm |
| Type B dimensions | 1.6 x 95 mm |
| Type C dimensions | 2.0 x 95 mm |
| Type D dimensions | 2.8 x 105 mm |
| Type E dimensions | 3.4 x 105 mm |
| Type F dimensions | 4.0 x 105 mm |
| Type G dimensions | 3.0 x 235 mm |
Quotation checklist
- Full SKU and its own type letter, quantity and recorded size text
- Labelled dimensional drawing defining axes, internal bore and tolerances where required
- Host syringe or drench-head reference and end-fitting dimensions; obtain written fit confirmation
- Component-specific hub/cannula materials and an itemised supplied-parts list
- Product-specific care, compatibility and any required sterility documentation; no method is assumed
- Packing quantities, destination country, required documents and commercial terms to confirm
Frequently asked purchasing questions
Is type A the same size across these products?
No. INJ-01057 type A is listed as 6 x 110 mm, while INJ-01061 type A is 1.2 x 55 mm. Keep the type letter with its full SKU.
Are these components confirmed Luer-lock?
No Luer-lock or thread standard is established by the compared specification fields. Confirm the actual interface against the host equipment.
Are both cannula records confirmed SUS304 stainless steel?
SUS304 is explicitly recorded for the INJ-01061 cannula, with brass for its hub. The compared INJ-01057 specification table does not state a material. Confirm it for that exact product.
Does a listed diameter specify the internal bore?
No measurement basis for the bore is established by these fields. Request a labelled dimensional specification.
Does the nozzle name establish animal suitability or an administration method?
No. Catalogue names identify equipment records. Actual suitability and use require the product-specific instructions and appropriate professional assessment.
Browse the existing range
Veterinary Needle Series — open individual products for their full specifications and quotation options.
Separate self-filling drencher capacity and configuration guide.
Separate veterinary syringe capacity and feed-type guide.
Request a product-specific quotation
List each selected SKU, required configuration and quantity separately, with your destination country. Include the existing equipment reference, labelled measurements and the supplied parts you want confirmed.
This is a general enquiry; no product is selected automatically. Enter the product references and specifications in the form.